120 PSI PUMP (2 GPM FLOW) **** Fits M6 ONLY --- Does not fit the M4*****

120 PSI 2GPM 12 VOLT 4.0 AMP SANTOPRENE DIAPHRAGM PUMP WITH AUTOMATIC PRESSURE REGULATOR. M14X1.5MM THREADED OUTPUT AND 3/8" BARBED INTAKE. FLOW DIRECTION FOR THE TOP VIEW SHOWN IS FROM BARB TO THREADS. THIS IS NOT THE CORRECT REPLACEMENT PUMP FOR THE LATEST M4 SPRAYER WITH A BATTERY DOOR.  

*******NOTE: REMOVE THE RUBBER INSERTS FROM INSIDE PUMP INLET AND OUTLET BEFORE INSTALLING*******

(THE INSERTS COMPLETELY SEAL THE PUMP DIAPHRAGM AND ARE INTENDED TO KEEP THE DIAPHRAGM WET TO PROVIDE ADEQUATE PRIMING WHEN FIRST INSTALLED.) 

 IT IS RECOMMENDED TO USE THE STRAIN RELIEF HOSE (ATTACHED TO THE PUMP OUTPUT THREADS) IF THE MAIN HOSE IS STIFF. THIS PROTECTS THE MOTOR THREADS FROM BEING BROKEN OFF AND MAKES THE HOSE EASIER TO USE (SEE ATTACHED PICTURE)

SAME DAY SHIPPING